top of page

Building Painting in Melbourne: Interior, Exterior & Heritage Costs

5 hours ago
5 min read
Building Painting
Building Painting

Building painting in Melbourne is the professional repainting of residential, commercial and heritage buildings - interior, exterior, or both - by licensed and insured painters. A quality paint job protects the substrate, refreshes appearance and adds measurable value, with exterior repaints typically lasting 7-12 years and interior repaints 7-15 years depending on prep and paint system.


Key takeaways


  • Building painting refreshes and protects residential, commercial, and heritage properties.

  • Commercial painting contracts often require Registered Building Practitioner status.

  • Body-corporate works require evidence of insurance and lead-safe practices.

  • Winter exterior painting requires careful scheduling and weather monitoring.

  • Surface preparation is critical to a durable, attractive finish.

  • Quality painting lifts property value and extends substrate life.


How Much Does Building Painting Cost in Melbourne?

Indicative 2026 Melbourne painting pricing: interior painting $20-$45 per m2 of wall surface (a standard 3-bedroom home interior runs $4,000-$8,000); exterior painting $35-$70 per m2 of wall surface (a standard 3-bedroom home exterior runs $6,000-$15,000); commercial painting $35-$80 per m2 depending on access and substrate; heritage painting $50-$120 per m2 due to specialist prep and lead-safe work. Room-level pricing: a 4x4 m room (walls, ceiling, doors, skirting) $600-$1,200. Pricing depends on prep required (filling, sanding, crack repair), paint quality (premium Dulux, Taubmans, Haymes versus trade-grade), access (scaffolding, elevated work platform, confined yard), and number of colours. Always get an itemised quote specifying prep scope, paint system, coats and access.


Does building painting in Melbourne require a licensed painter?

No, building painting in Melbourne does not strictly require a licensed painter for residential work, but commercial painting contracts often require painters to hold a Registered Building Practitioner (RBP) status. For body-corporate and heritage works, evidence of insurance, lead-safe practices and colour consultation certifications may be required.


What Surface Preparation Is Required Before Painting?

Surface preparation is 60-70% of a quality paint job and the single biggest determinant of how long the finish lasts. Standard prep on a Melbourne exterior includes: high-pressure wash to remove dirt, mould and loose paint; scrape and sand loose and flaking paint back to a sound edge; fill cracks, holes and gaps with appropriate filler; treat mould with a bleach or fungicidal wash; prime bare surfaces and repaired areas with the right primer (alkyd for timber, masonry primer for render, etch primer for metal); and mask windows, doors, paths and garden. Skipping prep to lower the price is the most common cause of premature paint failure - a 'cheap' paint job that flakes within 2-3 years costs more over 10 years than a properly prepped job that lasts 10. For heritage buildings with lead paint, prep must include lead-safe work practices (containment, HEPA vacuum, licensed disposal).


What Paint System Should You Use?

The paint system (primer + undercoat + topcoats) must match the substrate and exposure. Exterior timber: oil-based or acrylic primer, two coats of premium exterior acrylic (Dulux Weathershield, Taubmans Sunproof, Haymes Ultrapro Exterior). Exterior masonry and render: masonry primer, two coats of premium exterior masonry acrylic. Exterior metal: etch primer, two coats of premium exterior acrylic or polyurethane. Interior walls: acrylic undercoat, two coats of premium interior acrylic (Dulux Wash & Wear, Taubmans Endure). Interior trim (skirting, doors, architraves): acrylic or oil-based undercoat, two coats of premium enamel or acrylic trim paint. Ceilings: flat acrylic ceiling white. For Melbourne coastal and bayside areas, choose a paint system rated for coastal exposure. Premium paints cost 20-40% more than trade-grade but typically last 30-50% longer.


Can painting be done in winter in Melbourne?

Yes, building painting can be done in winter in Melbourne, but exterior work is constrained by temperature, rain and humidity. Water-based paints require surface temperatures above 10°C and dry conditions for 4-6 hours. Winter exterior painting requires careful scheduling, weather monitoring and the use of fast-drying low-temperature formulations.


What Is Different About Heritage Building Painting?

Heritage painting in Melbourne covers properties in a Heritage Overlay (HO) under the local planning scheme, listed on the Victorian Heritage Register, or in a heritage precinct. Key differences: a heritage permit from the relevant council or Heritage Victoria is usually required before painting an exterior (or changing exterior colours); original colour schemes may be required or restricted to a heritage palette (often sourced from paint scrape analysis of original layers); lead paint is almost certainly present on pre-1970 buildings and must be managed under lead-safe work practices with licensed disposal; limewash or mineral silicate paint may be required on heritage masonry rather than modern acrylic; and ornate details (friezes, cornices, ceiling roses) may require specialist decorative painting. For heritage building painting in Melbourne, choose a painter with documented heritage experience and the right permits in place before work starts.


How Long Does a Building Paint Job Take?

Timeline depends on size and scope. Interior of a standard 3-bedroom home: 4-7 days (prep 2-3 days, painting 2-4 days). Exterior of a standard 3-bedroom home: 7-14 days (prep 3-5 days, painting 4-9 days, dependent on weather for exterior work). Commercial painting: scheduled in stages to minimise business disruption, often after-hours or weekends. Heritage painting: 2-4 weeks for a typical heritage facade due to specialist prep, lead-safe work and ornate detail. Weather is the biggest variable for exterior painting in Melbourne - exterior acrylic needs 24-48 hours of dry weather above 10C to cure properly, and Melbourne's changeable weather can extend exterior timelines. A reputable painter works to a written program with milestones.


How Do You Choose a Building Painter in Melbourne?

Look for: a current Victorian building registration or painter's licence where required (painting itself does not require a licence in Victoria, but any building work over $10,000 does, and lead removal requires a licensed asbestos/lead assessor); $5-10 million public liability insurance; documented experience in comparable Melbourne buildings (residential, commercial, heritage); a written itemised quote specifying prep scope, paint system (brand and product), number of coats, access equipment and timeline; a written warranty on workmanship (typically 3-7 years); references from recent comparable jobs; and lead-safe work practices certification for pre-1970 buildings. Avoid painters who quote by 'the house' without measuring, who cannot specify the paint brand and product, or who propose to paint over flaking paint without prep.

Frequently Asked Questions


How much does building painting cost in Melbourne?

Indicative 2026 pricing: interior $20-$45 per m2 of wall surface ($4,000-$8,000 for a standard 3-bedroom home); exterior $35-$70 per m2 ($6,000-$15,000); commercial $35-$80 per m2; heritage $50-$120 per m2. Pricing depends on prep, paint quality, access and number of colours.


How long does a paint job last?

A properly prepped exterior repaint lasts 7-12 years; interior repaint 7-15 years. Premium paint systems last 30-50% longer than trade-grade. The single biggest determinant of lifespan is surface preparation - skipping prep to lower price is the most common cause of premature failure.


Do I need a permit to paint a heritage building in Melbourne?

Usually yes. Properties in a Heritage Overlay (HO), on the Victorian Heritage Register, or in a heritage precinct typically need a heritage permit before exterior painting or colour change. Original or heritage-palette colours may be required. Lead paint on pre-1970 buildings must be managed under lead-safe work practices.


How long does it take to paint a Melbourne home?

Interior of a standard 3-bedroom home 4-7 days; exterior 7-14 days (weather dependent). Heritage painting 2-4 weeks due to specialist prep, lead-safe work and ornate detail. Commercial painting is scheduled in stages to minimise disruption, often after-hours.


How do I choose a building painter in Melbourne?

Look for $5-10m public liability insurance, documented experience in comparable buildings, an itemised quote specifying prep, paint brand and product, coats and access, a 3-7 year written warranty, and lead-safe work practices certification for pre-1970 buildings. Avoid painters who quote without measuring or who skip prep.


Conclusion

Building painting in Melbourne refreshes and protects residential, commercial and heritage properties when completed by qualified painters using quality materials. Confirm insurance, surface preparation scope, paint specifications and warranty terms in writing before commencement. Properly executed painting lifts property value, extends substrate life and delivers a durable, attractive finish that withstands Melbourne's variable climate and seasonal weather conditions.

Comments


bottom of page